TST: Signal abort for ctest failures correctly

ctest/c_cblat1.f

@@ -38,9 +38,12 @@
             CALL CHECK1(SFAC)
          END IF
 *        -- Print
-         IF (PASS) WRITE (NOUT,99998)
+         IF (PASS) THEN
+            WRITE (NOUT,99998)
+         ELSE
+            CALL ABORT
+        END IF
    20 CONTINUE
-      STOP
 *
 99999 FORMAT (' Complex CBLAS Test Program Results',/1X)
 99998 FORMAT ('                                    ----- PASS -----')
@@ -228,7 +231,7 @@
                CALL ITEST1(ICAMAXTEST(N,CX,INCX),ITRUE3(NP1))
             ELSE
                WRITE (NOUT,*) ' Shouldn''t be here in CHECK1'
-               STOP
+               CALL ABORT
             END IF
 *
    40    CONTINUE
@@ -512,7 +515,7 @@
                CALL CTEST(LENY,CY,CT10Y(1,KN,KI),CSIZE3,1.0E0)
             ELSE
                WRITE (NOUT,*) ' Shouldn''t be here in CHECK2'
-               STOP
+               CALL ABORT
             END IF
 *
    40    CONTINUE

ctest/c_cblat2.f

@@ -10,7 +10,7 @@
 *  'CBLAT2.SNAP'     NAME OF SNAPSHOT OUTPUT FILE
 *  -1                UNIT NUMBER OF SNAPSHOT FILE (NOT USED IF .LT. 0)
 *  F        LOGICAL FLAG, T TO REWIND SNAPSHOT FILE AFTER EACH RECORD.
-*  F        LOGICAL FLAG, T TO STOP ON FAILURES.
+*  F        LOGICAL FLAG, T TO CALL ABORT ON FAILURES.
 *  T        LOGICAL FLAG, T TO TEST ERROR EXITS.
 *  2        0 TO TEST COLUMN-MAJOR, 1 TO TEST ROW-MAJOR, 2 TO TEST BOTH
 *  16.0     THRESHOLD VALUE OF TEST RATIO
@@ -243,7 +243,7 @@
      $      GO TO 70
    60 CONTINUE
       WRITE( NOUT, FMT = 9986 )SNAMET
-      STOP
+      CALL ABORT
    70 LTEST( I ) = LTESTT
       GO TO 50
 *
@@ -283,7 +283,7 @@
       SAME = LCE( YY, YT, N )
       IF( .NOT.SAME.OR.ERR.NE.RZERO )THEN
          WRITE( NOUT, FMT = 9985 )TRANS, SAME, ERR
-         STOP
+         CALL ABORT
       END IF
       TRANS = 'T'
       CALL CMVCH( TRANS, N, N, ONE, A, NMAX, X, -1, ZERO, Y, -1, YT, G,
@@ -291,7 +291,7 @@
       SAME = LCE( YY, YT, N )
       IF( .NOT.SAME.OR.ERR.NE.RZERO )THEN
          WRITE( NOUT, FMT = 9985 )TRANS, SAME, ERR
-         STOP
+         CALL ABORT
       END IF
 *
 *     Test each subroutine in turn.
@@ -418,7 +418,9 @@
       IF( TRACE )
      $   CLOSE ( NTRA )
       CLOSE ( NOUT )
-      STOP
+      IF( FATAL ) THEN
+         CALL ABORT
+      END IF
 *
 10002 FORMAT( ' COLUMN-MAJOR AND ROW-MAJOR DATA LAYOUTS ARE TESTED' )
 10001 FORMAT( ' ROW-MAJOR DATA LAYOUT IS TESTED' )

ctest/c_cblat3.f

@@ -10,7 +10,7 @@
 *  'CBLAT3.SNAP'     NAME OF SNAPSHOT OUTPUT FILE
 *  -1                UNIT NUMBER OF SNAPSHOT FILE (NOT USED IF .LT. 0)
 *  F        LOGICAL FLAG, T TO REWIND SNAPSHOT FILE AFTER EACH RECORD.
-*  F        LOGICAL FLAG, T TO STOP ON FAILURES.
+*  F        LOGICAL FLAG, T TO CALL ABORT ON FAILURES.
 *  T        LOGICAL FLAG, T TO TEST ERROR EXITS.
 *  2        0 TO TEST COLUMN-MAJOR, 1 TO TEST ROW-MAJOR, 2 TO TEST BOTH
 *  16.0     THRESHOLD VALUE OF TEST RATIO
@@ -194,7 +194,7 @@
      $      GO TO 50
    40 CONTINUE
       WRITE( NOUT, FMT = 9990 )SNAMET
-      STOP
+      CALL ABORT
    50 LTEST( I ) = LTESTT
       GO TO 30
 *
@@ -237,7 +237,7 @@
       SAME = LCE( CC, CT, N )
       IF( .NOT.SAME.OR.ERR.NE.RZERO )THEN
          WRITE( NOUT, FMT = 9989 )TRANSA, TRANSB, SAME, ERR
-         STOP
+         CALL ABORT
       END IF
       TRANSB = 'C'
       CALL CMMCH( TRANSA, TRANSB, N, 1, N, ONE, AB, NMAX,
@@ -246,7 +246,7 @@
       SAME = LCE( CC, CT, N )
       IF( .NOT.SAME.OR.ERR.NE.RZERO )THEN
          WRITE( NOUT, FMT = 9989 )TRANSA, TRANSB, SAME, ERR
-         STOP
+         CALL ABORT
       END IF
       DO 120 J = 1, N
          AB( J, NMAX + 1 ) = N - J + 1
@@ -264,7 +264,7 @@
       SAME = LCE( CC, CT, N )
       IF( .NOT.SAME.OR.ERR.NE.RZERO )THEN
          WRITE( NOUT, FMT = 9989 )TRANSA, TRANSB, SAME, ERR
-         STOP
+         CALL ABORT
       END IF
       TRANSB = 'C'
       CALL CMMCH( TRANSA, TRANSB, N, 1, N, ONE, AB, NMAX,
@@ -273,7 +273,7 @@
       SAME = LCE( CC, CT, N )
       IF( .NOT.SAME.OR.ERR.NE.RZERO )THEN
          WRITE( NOUT, FMT = 9989 )TRANSA, TRANSB, SAME, ERR
-         STOP
+         CALL ABORT
       END IF
 *
 *     Test each subroutine in turn.
@@ -385,7 +385,9 @@
       IF( TRACE )
      $   CLOSE ( NTRA )
       CLOSE ( NOUT )
-      STOP
+      IF( FATAL ) THEN
+         CALL ABORT
+      END IF
 *
 10002 FORMAT( ' COLUMN-MAJOR AND ROW-MAJOR DATA LAYOUTS ARE TESTED' )
 10001 FORMAT(' ROW-MAJOR DATA LAYOUT IS TESTED' )

ctest/c_cblat3_3m.f

@@ -10,7 +10,7 @@
 *  'CBLAT3.SNAP'     NAME OF SNAPSHOT OUTPUT FILE
 *  -1                UNIT NUMBER OF SNAPSHOT FILE (NOT USED IF .LT. 0)
 *  F        LOGICAL FLAG, T TO REWIND SNAPSHOT FILE AFTER EACH RECORD.
-*  F        LOGICAL FLAG, T TO STOP ON FAILURES.
+*  F        LOGICAL FLAG, T TO CALL ABORT ON FAILURES.
 *  T        LOGICAL FLAG, T TO TEST ERROR EXITS.
 *  2        0 TO TEST COLUMN-MAJOR, 1 TO TEST ROW-MAJOR, 2 TO TEST BOTH
 *  16.0     THRESHOLD VALUE OF TEST RATIO
@@ -194,7 +194,7 @@
      $      GO TO 50
    40 CONTINUE
       WRITE( NOUT, FMT = 9990 )SNAMET
-      STOP
+      CALL ABORT
    50 LTEST( I ) = LTESTT
       GO TO 30
 *
@@ -237,7 +237,7 @@
       SAME = LCE( CC, CT, N )
       IF( .NOT.SAME.OR.ERR.NE.RZERO )THEN
          WRITE( NOUT, FMT = 9989 )TRANSA, TRANSB, SAME, ERR
-         STOP
+         CALL ABORT
       END IF
       TRANSB = 'C'
       CALL CMMCH( TRANSA, TRANSB, N, 1, N, ONE, AB, NMAX,
@@ -246,7 +246,7 @@
       SAME = LCE( CC, CT, N )
       IF( .NOT.SAME.OR.ERR.NE.RZERO )THEN
          WRITE( NOUT, FMT = 9989 )TRANSA, TRANSB, SAME, ERR
-         STOP
+         CALL ABORT
       END IF
       DO 120 J = 1, N
          AB( J, NMAX + 1 ) = N - J + 1
@@ -264,7 +264,7 @@
       SAME = LCE( CC, CT, N )
       IF( .NOT.SAME.OR.ERR.NE.RZERO )THEN
          WRITE( NOUT, FMT = 9989 )TRANSA, TRANSB, SAME, ERR
-         STOP
+         CALL ABORT
       END IF
       TRANSB = 'C'
       CALL CMMCH( TRANSA, TRANSB, N, 1, N, ONE, AB, NMAX,
@@ -273,7 +273,7 @@
       SAME = LCE( CC, CT, N )
       IF( .NOT.SAME.OR.ERR.NE.RZERO )THEN
          WRITE( NOUT, FMT = 9989 )TRANSA, TRANSB, SAME, ERR
-         STOP
+         CALL ABORT
       END IF
 *
 *     Test each subroutine in turn.
@@ -385,7 +385,9 @@
       IF( TRACE )
      $   CLOSE ( NTRA )
       CLOSE ( NOUT )
-      STOP
+      IF( FATAL ) THEN
+         CALL ABORT
+      END IF
 *
 10002 FORMAT( ' COLUMN-MAJOR AND ROW-MAJOR DATA LAYOUTS ARE TESTED' )
 10001 FORMAT(' ROW-MAJOR DATA LAYOUT IS TESTED' )

ctest/c_dblat1.f

@@ -44,9 +44,12 @@
             CALL CHECK3(SFAC)
          END IF
 *        -- Print
-         IF (PASS) WRITE (NOUT,99998)
+         IF (PASS) THEN
+            WRITE (NOUT,99998)
+         ELSE
+            CALL ABORT
+        END IF
    20 CONTINUE
-      STOP
 *
 99999 FORMAT (' Real CBLAS Test Program Results',/1X)
 99998 FORMAT ('                                    ----- PASS -----')
@@ -136,7 +139,7 @@
             CALL STEST1(SS,DS1(K),DS1(K),SFAC)
          ELSE
             WRITE (NOUT,*) ' Shouldn''t be here in CHECK0'
-            STOP
+            CALL ABORT
          END IF
    20 CONTINUE
    40 RETURN
@@ -229,7 +232,7 @@
                CALL ITEST1(IDAMAXTEST(N,SX,INCX),ITRUE2(NP1))
             ELSE
                WRITE (NOUT,*) ' Shouldn''t be here in CHECK1'
-               STOP
+               CALL ABORT
             END IF
    60    CONTINUE
    80 CONTINUE
@@ -384,7 +387,7 @@
                CALL STEST(LENY,SY,STY,SSIZE2(1,1),1.0D0)
             ELSE
                WRITE (NOUT,*) ' Shouldn''t be here in CHECK2'
-               STOP
+               CALL ABORT
             END IF
   100    CONTINUE
   120 CONTINUE
@@ -472,7 +475,7 @@
    70          CONTINUE      
                ELSE
                WRITE (NOUT,*) ' Shouldn''t be here in CHECK3'
-               STOP
+               CALL ABORT
             END IF
    40    CONTINUE
    60 CONTINUE

ctest/c_dblat2.f

@@ -10,7 +10,7 @@
 *  'DBLAT2.SNAP'     NAME OF SNAPSHOT OUTPUT FILE
 *  -1                UNIT NUMBER OF SNAPSHOT FILE (NOT USED IF .LT. 0)
 *  F        LOGICAL FLAG, T TO REWIND SNAPSHOT FILE AFTER EACH RECORD.
-*  F        LOGICAL FLAG, T TO STOP ON FAILURES.
+*  F        LOGICAL FLAG, T TO CALL ABORT ON FAILURES.
 *  T        LOGICAL FLAG, T TO TEST ERROR EXITS.
 *  2        0 TO TEST COLUMN-MAJOR, 1 TO TEST ROW-MAJOR, 2 TO TEST BOTH
 *  16.0     THRESHOLD VALUE OF TEST RATIO
@@ -239,7 +239,7 @@
      $      GO TO 70
    60 CONTINUE
       WRITE( NOUT, FMT = 9986 )SNAMET
-      STOP
+      CALL ABORT
    70 LTEST( I ) = LTESTT
       GO TO 50
 *
@@ -279,7 +279,7 @@
       SAME = LDE( YY, YT, N )
       IF( .NOT.SAME.OR.ERR.NE.ZERO )THEN
          WRITE( NOUT, FMT = 9985 )TRANS, SAME, ERR
-         STOP
+         CALL ABORT
       END IF
       TRANS = 'T'
       CALL DMVCH( TRANS, N, N, ONE, A, NMAX, X, -1, ZERO, Y, -1, YT, G,
@@ -287,7 +287,7 @@
       SAME = LDE( YY, YT, N )
       IF( .NOT.SAME.OR.ERR.NE.ZERO )THEN
          WRITE( NOUT, FMT = 9985 )TRANS, SAME, ERR
-         STOP
+         CALL ABORT
       END IF
 *
 *     Test each subroutine in turn.
@@ -414,7 +414,9 @@
       IF( TRACE )
      $   CLOSE ( NTRA )
       CLOSE ( NOUT )
-      STOP
+      IF( FATAL ) THEN
+         CALL ABORT
+      END IF
 *
 10002 FORMAT( ' COLUMN-MAJOR AND ROW-MAJOR DATA LAYOUTS ARE TESTED' )
 10001 FORMAT( ' ROW-MAJOR DATA LAYOUT IS TESTED' )

ctest/c_dblat3.f

@@ -10,7 +10,7 @@
 *  'DBLAT3.SNAP'     NAME OF SNAPSHOT OUTPUT FILE
 *  -1                UNIT NUMBER OF SNAPSHOT FILE (NOT USED IF .LT. 0)
 *  F        LOGICAL FLAG, T TO REWIND SNAPSHOT FILE AFTER EACH RECORD.
-*  F        LOGICAL FLAG, T TO STOP ON FAILURES.
+*  F        LOGICAL FLAG, T TO CALL ABORT ON FAILURES.
 *  T        LOGICAL FLAG, T TO TEST ERROR EXITS.
 *  2        0 TO TEST COLUMN-MAJOR, 1 TO TEST ROW-MAJOR, 2 TO TEST BOTH
 *  16.0     THRESHOLD VALUE OF TEST RATIO
@@ -189,7 +189,7 @@
      $      GO TO 50
    40 CONTINUE
       WRITE( NOUT, FMT = 9990 )SNAMET
-      STOP
+      CALL ABORT
    50 LTEST( I ) = LTESTT
       GO TO 30
 *
@@ -232,7 +232,7 @@
       SAME = LDE( CC, CT, N )
       IF( .NOT.SAME.OR.ERR.NE.ZERO )THEN
          WRITE( NOUT, FMT = 9989 )TRANSA, TRANSB, SAME, ERR
-         STOP
+         CALL ABORT
       END IF
       TRANSB = 'T'
       CALL DMMCH( TRANSA, TRANSB, N, 1, N, ONE, AB, NMAX,
@@ -241,7 +241,7 @@
       SAME = LDE( CC, CT, N )
       IF( .NOT.SAME.OR.ERR.NE.ZERO )THEN
          WRITE( NOUT, FMT = 9989 )TRANSA, TRANSB, SAME, ERR
-         STOP
+         CALL ABORT
       END IF
       DO 120 J = 1, N
          AB( J, NMAX + 1 ) = N - J + 1
@@ -259,7 +259,7 @@
       SAME = LDE( CC, CT, N )
       IF( .NOT.SAME.OR.ERR.NE.ZERO )THEN
          WRITE( NOUT, FMT = 9989 )TRANSA, TRANSB, SAME, ERR
-         STOP
+         CALL ABORT
       END IF
       TRANSB = 'T'
       CALL DMMCH( TRANSA, TRANSB, N, 1, N, ONE, AB, NMAX,
@@ -268,7 +268,7 @@
       SAME = LDE( CC, CT, N )
       IF( .NOT.SAME.OR.ERR.NE.ZERO )THEN
          WRITE( NOUT, FMT = 9989 )TRANSA, TRANSB, SAME, ERR
-         STOP
+         CALL ABORT
       END IF
 *
 *     Test each subroutine in turn.
@@ -379,7 +379,9 @@
       IF( TRACE )
      $   CLOSE ( NTRA )
       CLOSE ( NOUT )
-      STOP
+      IF( FATAL ) THEN
+         CALL ABORT
+      END IF
 *
 10002 FORMAT( ' COLUMN-MAJOR AND ROW-MAJOR DATA LAYOUTS ARE TESTED' )
 10001 FORMAT( ' ROW-MAJOR DATA LAYOUT IS TESTED' )

ctest/c_sblat1.f

@@ -44,9 +44,12 @@
             CALL CHECK3(SFAC)
          END IF
 *        -- Print
-         IF (PASS) WRITE (NOUT,99998)
+         IF (PASS) THEN
+            WRITE (NOUT,99998)
+         ELSE
+            CALL ABORT
+        END IF
    20 CONTINUE
-      STOP
 *
 99999 FORMAT (' Real CBLAS Test Program Results',/1X)
 99998 FORMAT ('                                    ----- PASS -----')
@@ -136,7 +139,7 @@
             CALL STEST1(SS,DS1(K),DS1(K),SFAC)
          ELSE
             WRITE (NOUT,*) ' Shouldn''t be here in CHECK0'
-            STOP
+            CALL ABORT
          END IF
    20 CONTINUE
    40 RETURN
@@ -229,7 +232,7 @@
                CALL ITEST1(ISAMAXTEST(N,SX,INCX),ITRUE2(NP1))
             ELSE
                WRITE (NOUT,*) ' Shouldn''t be here in CHECK1'
-               STOP
+               CALL ABORT
             END IF
    60    CONTINUE
    80 CONTINUE
@@ -384,7 +387,7 @@
                CALL STEST(LENY,SY,STY,SSIZE2(1,1),1.0E0)
             ELSE
                WRITE (NOUT,*) ' Shouldn''t be here in CHECK2'
-               STOP
+               CALL ABORT
             END IF
   100    CONTINUE
   120 CONTINUE
@@ -479,7 +482,7 @@
    70          CONTINUE
             ELSE
                WRITE (NOUT,*) ' Shouldn''t be here in CHECK3'
-               STOP
+               CALL ABORT
             END IF
    40    CONTINUE
    60 CONTINUE
@@ -759,4 +762,4 @@
          END IF
       END IF
       RETURN
-      END
+      END

ctest/c_sblat2.f

@@ -10,7 +10,7 @@
 *  'SBLAT2.SNAP'     NAME OF SNAPSHOT OUTPUT FILE
 *  -1                UNIT NUMBER OF SNAPSHOT FILE (NOT USED IF .LT. 0)
 *  F        LOGICAL FLAG, T TO REWIND SNAPSHOT FILE AFTER EACH RECORD.
-*  F        LOGICAL FLAG, T TO STOP ON FAILURES.
+*  F        LOGICAL FLAG, T TO CALL ABORT ON FAILURES.
 *  T        LOGICAL FLAG, T TO TEST ERROR EXITS.
 *  2        0 TO TEST COLUMN-MAJOR, 1 TO TEST ROW-MAJOR, 2 TO TEST BOTH
 *  16.0     THRESHOLD VALUE OF TEST RATIO
@@ -239,7 +239,7 @@
      $      GO TO 70
    60 CONTINUE
       WRITE( NOUT, FMT = 9986 )SNAMET
-      STOP
+      CALL ABORT
    70 LTEST( I ) = LTESTT
       GO TO 50
 *
@@ -279,7 +279,7 @@
       SAME = LSE( YY, YT, N )
       IF( .NOT.SAME.OR.ERR.NE.ZERO )THEN
          WRITE( NOUT, FMT = 9985 )TRANS, SAME, ERR
-         STOP
+         CALL ABORT
       END IF
       TRANS = 'T'
       CALL SMVCH( TRANS, N, N, ONE, A, NMAX, X, -1, ZERO, Y, -1, YT, G,
@@ -287,7 +287,7 @@
       SAME = LSE( YY, YT, N )
       IF( .NOT.SAME.OR.ERR.NE.ZERO )THEN
          WRITE( NOUT, FMT = 9985 )TRANS, SAME, ERR
-         STOP
+         CALL ABORT
       END IF
 *
 *     Test each subroutine in turn.
@@ -414,7 +414,9 @@
       IF( TRACE )
      $   CLOSE ( NTRA )
       CLOSE ( NOUT )
-      STOP
+      IF( FATAL ) THEN
+         CALL ABORT
+      END IF
 *
 10002 FORMAT( ' COLUMN-MAJOR AND ROW-MAJOR DATA LAYOUTS ARE TESTED' )
 10001 FORMAT( ' ROW-MAJOR DATA LAYOUT IS TESTED' )

ctest/c_sblat3.f

@@ -10,7 +10,7 @@
 *  'SBLAT3.SNAP'     NAME OF SNAPSHOT OUTPUT FILE
 *  -1                UNIT NUMBER OF SNAPSHOT FILE (NOT USED IF .LT. 0)
 *  F        LOGICAL FLAG, T TO REWIND SNAPSHOT FILE AFTER EACH RECORD.
-*  F        LOGICAL FLAG, T TO STOP ON FAILURES.
+*  F        LOGICAL FLAG, T TO CALL ABORT ON FAILURES.
 *  T        LOGICAL FLAG, T TO TEST ERROR EXITS.
 *  2        0 TO TEST COLUMN-MAJOR, 1 TO TEST ROW-MAJOR, 2 TO TEST BOTH
 *  16.0     THRESHOLD VALUE OF TEST RATIO
@@ -188,7 +188,7 @@
      $      GO TO 50
    40 CONTINUE
       WRITE( NOUT, FMT = 9990 )SNAMET
-      STOP
+      CALL ABORT
    50 LTEST( I ) = LTESTT
       GO TO 30
 *
@@ -231,7 +231,7 @@
       SAME = LSE( CC, CT, N )
       IF( .NOT.SAME.OR.ERR.NE.ZERO )THEN
          WRITE( NOUT, FMT = 9989 )TRANSA, TRANSB, SAME, ERR
-         STOP
+         CALL ABORT
       END IF
       TRANSB = 'T'
       CALL SMMCH( TRANSA, TRANSB, N, 1, N, ONE, AB, NMAX,
@@ -240,7 +240,7 @@
       SAME = LSE( CC, CT, N )
       IF( .NOT.SAME.OR.ERR.NE.ZERO )THEN
          WRITE( NOUT, FMT = 9989 )TRANSA, TRANSB, SAME, ERR
-         STOP
+         CALL ABORT
       END IF
       DO 120 J = 1, N
          AB( J, NMAX + 1 ) = N - J + 1
@@ -258,7 +258,7 @@
       SAME = LSE( CC, CT, N )
       IF( .NOT.SAME.OR.ERR.NE.ZERO )THEN
          WRITE( NOUT, FMT = 9989 )TRANSA, TRANSB, SAME, ERR
-         STOP
+         CALL ABORT
       END IF
       TRANSB = 'T'
       CALL SMMCH( TRANSA, TRANSB, N, 1, N, ONE, AB, NMAX,
@@ -267,7 +267,7 @@
       SAME = LSE( CC, CT, N )
       IF( .NOT.SAME.OR.ERR.NE.ZERO )THEN
          WRITE( NOUT, FMT = 9989 )TRANSA, TRANSB, SAME, ERR
-         STOP
+         CALL ABORT
       END IF
 *
 *     Test each subroutine in turn.
@@ -378,7 +378,9 @@
       IF( TRACE )
      $   CLOSE ( NTRA )
       CLOSE ( NOUT )
-      STOP
+      IF( FATAL ) THEN
+         CALL ABORT
+      END IF
 *
 10002 FORMAT( ' COLUMN-MAJOR AND ROW-MAJOR DATA LAYOUTS ARE TESTED' )
 10001 FORMAT( ' ROW-MAJOR DATA LAYOUT IS TESTED' )

ctest/c_zblat1.f

@@ -38,9 +38,12 @@
             CALL CHECK1(SFAC)
          END IF
 *        -- Print
-         IF (PASS) WRITE (NOUT,99998)
+         IF (PASS) THEN
+            WRITE (NOUT,99998)
+         ELSE
+            CALL ABORT
+        END IF
    20 CONTINUE
-      STOP
 *
 99999 FORMAT (' Complex CBLAS Test Program Results',/1X)
 99998 FORMAT ('                                    ----- PASS -----')
@@ -228,7 +231,7 @@
                CALL ITEST1(IZAMAXTEST(N,CX,INCX),ITRUE3(NP1))
             ELSE
                WRITE (NOUT,*) ' Shouldn''t be here in CHECK1'
-               STOP
+               CALL ABORT
             END IF
 *
    40    CONTINUE
@@ -512,7 +515,7 @@
                CALL CTEST(LENY,CY,CT10Y(1,KN,KI),CSIZE3,1.0D0)
             ELSE
                WRITE (NOUT,*) ' Shouldn''t be here in CHECK2'
-               STOP
+               CALL ABORT
             END IF
 *
    40    CONTINUE

ctest/c_zblat2.f

@@ -10,7 +10,7 @@
 *  'CBLAT2.SNAP'     NAME OF SNAPSHOT OUTPUT FILE
 *  -1                UNIT NUMBER OF SNAPSHOT FILE (NOT USED IF .LT. 0)
 *  F        LOGICAL FLAG, T TO REWIND SNAPSHOT FILE AFTER EACH RECORD.
-*  F        LOGICAL FLAG, T TO STOP ON FAILURES.
+*  F        LOGICAL FLAG, T TO CALL ABORT ON FAILURES.
 *  T        LOGICAL FLAG, T TO TEST ERROR EXITS.
 *  2        0 TO TEST COLUMN-MAJOR, 1 TO TEST ROW-MAJOR, 2 TO TEST BOTH
 *  16.0     THRESHOLD VALUE OF TEST RATIO
@@ -243,7 +243,7 @@
      $      GO TO 70
    60 CONTINUE
       WRITE( NOUT, FMT = 9986 )SNAMET
-      STOP
+      CALL ABORT
    70 LTEST( I ) = LTESTT
       GO TO 50
 *
@@ -283,7 +283,7 @@
       SAME = LZE( YY, YT, N )
       IF( .NOT.SAME.OR.ERR.NE.RZERO )THEN
          WRITE( NOUT, FMT = 9985 )TRANS, SAME, ERR
-         STOP
+         CALL ABORT
       END IF
       TRANS = 'T'
       CALL ZMVCH( TRANS, N, N, ONE, A, NMAX, X, -1, ZERO, Y, -1, YT, G,
@@ -291,7 +291,7 @@
       SAME = LZE( YY, YT, N )
       IF( .NOT.SAME.OR.ERR.NE.RZERO )THEN
          WRITE( NOUT, FMT = 9985 )TRANS, SAME, ERR
-         STOP
+         CALL ABORT
       END IF
 *
 *     Test each subroutine in turn.
@@ -418,7 +418,9 @@
       IF( TRACE )
      $   CLOSE ( NTRA )
       CLOSE ( NOUT )
-      STOP
+      IF( FATAL ) THEN
+         CALL ABORT
+      END IF
 *
 10002 FORMAT( ' COLUMN-MAJOR AND ROW-MAJOR DATA LAYOUTS ARE TESTED' )
 10001 FORMAT( ' ROW-MAJOR DATA LAYOUT IS TESTED' )

ctest/c_zblat3.f

@@ -10,7 +10,7 @@
 *  'CBLAT3.SNAP'     NAME OF SNAPSHOT OUTPUT FILE
 *  -1                UNIT NUMBER OF SNAPSHOT FILE (NOT USED IF .LT. 0)
 *  F        LOGICAL FLAG, T TO REWIND SNAPSHOT FILE AFTER EACH RECORD.
-*  F        LOGICAL FLAG, T TO STOP ON FAILURES.
+*  F        LOGICAL FLAG, T TO CALL ABORT ON FAILURES.
 *  T        LOGICAL FLAG, T TO TEST ERROR EXITS.
 *  2        0 TO TEST COLUMN-MAJOR, 1 TO TEST ROW-MAJOR, 2 TO TEST BOTH
 *  16.0     THRESHOLD VALUE OF TEST RATIO
@@ -195,7 +195,7 @@
      $      GO TO 50
    40 CONTINUE
       WRITE( NOUT, FMT = 9990 )SNAMET
-      STOP
+      CALL ABORT
    50 LTEST( I ) = LTESTT
       GO TO 30
 *
@@ -238,7 +238,7 @@
       SAME = LZE( CC, CT, N )
       IF( .NOT.SAME.OR.ERR.NE.RZERO )THEN
          WRITE( NOUT, FMT = 9989 )TRANSA, TRANSB, SAME, ERR
-         STOP
+         CALL ABORT
       END IF
       TRANSB = 'C'
       CALL ZMMCH( TRANSA, TRANSB, N, 1, N, ONE, AB, NMAX,
@@ -247,7 +247,7 @@
       SAME = LZE( CC, CT, N )
       IF( .NOT.SAME.OR.ERR.NE.RZERO )THEN
          WRITE( NOUT, FMT = 9989 )TRANSA, TRANSB, SAME, ERR
-         STOP
+         CALL ABORT
       END IF
       DO 120 J = 1, N
          AB( J, NMAX + 1 ) = N - J + 1
@@ -265,7 +265,7 @@
       SAME = LZE( CC, CT, N )
       IF( .NOT.SAME.OR.ERR.NE.RZERO )THEN
          WRITE( NOUT, FMT = 9989 )TRANSA, TRANSB, SAME, ERR
-         STOP
+         CALL ABORT
       END IF
       TRANSB = 'C'
       CALL ZMMCH( TRANSA, TRANSB, N, 1, N, ONE, AB, NMAX,
@@ -274,7 +274,7 @@
       SAME = LZE( CC, CT, N )
       IF( .NOT.SAME.OR.ERR.NE.RZERO )THEN
          WRITE( NOUT, FMT = 9989 )TRANSA, TRANSB, SAME, ERR
-         STOP
+         CALL ABORT
       END IF
 *
 *     Test each subroutine in turn.
@@ -386,7 +386,9 @@
       IF( TRACE )
      $   CLOSE ( NTRA )
       CLOSE ( NOUT )
-      STOP
+      IF( FATAL ) THEN
+         CALL ABORT
+      END IF
 *
 10002 FORMAT( ' COLUMN-MAJOR AND ROW-MAJOR DATA LAYOUTS ARE TESTED' )
 10001 FORMAT(' ROW-MAJOR DATA LAYOUT IS TESTED' )

ctest/c_zblat3_3m.f

@@ -10,7 +10,7 @@
 *  'CBLAT3.SNAP'     NAME OF SNAPSHOT OUTPUT FILE
 *  -1                UNIT NUMBER OF SNAPSHOT FILE (NOT USED IF .LT. 0)
 *  F        LOGICAL FLAG, T TO REWIND SNAPSHOT FILE AFTER EACH RECORD.
-*  F        LOGICAL FLAG, T TO STOP ON FAILURES.
+*  F        LOGICAL FLAG, T TO CALL ABORT ON FAILURES.
 *  T        LOGICAL FLAG, T TO TEST ERROR EXITS.
 *  2        0 TO TEST COLUMN-MAJOR, 1 TO TEST ROW-MAJOR, 2 TO TEST BOTH
 *  16.0     THRESHOLD VALUE OF TEST RATIO
@@ -195,7 +195,7 @@
      $      GO TO 50
    40 CONTINUE
       WRITE( NOUT, FMT = 9990 )SNAMET
-      STOP
+      CALL ABORT
    50 LTEST( I ) = LTESTT
       GO TO 30
 *
@@ -238,7 +238,7 @@
       SAME = LZE( CC, CT, N )
       IF( .NOT.SAME.OR.ERR.NE.RZERO )THEN
          WRITE( NOUT, FMT = 9989 )TRANSA, TRANSB, SAME, ERR
-         STOP
+         CALL ABORT
       END IF
       TRANSB = 'C'
       CALL ZMMCH( TRANSA, TRANSB, N, 1, N, ONE, AB, NMAX,
@@ -247,7 +247,7 @@
       SAME = LZE( CC, CT, N )
       IF( .NOT.SAME.OR.ERR.NE.RZERO )THEN
          WRITE( NOUT, FMT = 9989 )TRANSA, TRANSB, SAME, ERR
-         STOP
+         CALL ABORT
       END IF
       DO 120 J = 1, N
          AB( J, NMAX + 1 ) = N - J + 1
@@ -265,7 +265,7 @@
       SAME = LZE( CC, CT, N )
       IF( .NOT.SAME.OR.ERR.NE.RZERO )THEN
          WRITE( NOUT, FMT = 9989 )TRANSA, TRANSB, SAME, ERR
-         STOP
+         CALL ABORT
       END IF
       TRANSB = 'C'
       CALL ZMMCH( TRANSA, TRANSB, N, 1, N, ONE, AB, NMAX,
@@ -274,7 +274,7 @@
       SAME = LZE( CC, CT, N )
       IF( .NOT.SAME.OR.ERR.NE.RZERO )THEN
          WRITE( NOUT, FMT = 9989 )TRANSA, TRANSB, SAME, ERR
-         STOP
+         CALL ABORT
       END IF
 *
 *     Test each subroutine in turn.
@@ -386,7 +386,9 @@
       IF( TRACE )
      $   CLOSE ( NTRA )
       CLOSE ( NOUT )
-      STOP
+      IF( FATAL ) THEN
+         CALL ABORT
+      END IF
 *
 10002 FORMAT( ' COLUMN-MAJOR AND ROW-MAJOR DATA LAYOUTS ARE TESTED' )
 10001 FORMAT(' ROW-MAJOR DATA LAYOUT IS TESTED' )